|
|
|
|
Sixteen channel AES3 output connection with 8 Neutrik XLR male connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES output as per the AES standard.
Application: Provides 8 AES/EBU XLR [...]
|
|
|
|
|
|
|
|
|
|
AD8-IFC DB25 to 8 x XLR Female. This cable allows the Apogee AP-8AD Yamaha A/D card to accept eight channels of analog input. Also suitable for use with the AD-16 (quantity 2 required for 16 channels). The wiring is the same as the analog input connector on a Tascam machine such [...]
|
|
|
|
|
|
|
|
|
|
Description: Sixteen channel AES/EBU* input connection with 8 Neutrik XLR female connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. This cable provides 16 channels of AES input as per the AES standard. Thumb screws are [...]
|
|
|
|
|
|
|
|
|
|
Description: Eight channel analog output connection with 8 Neutrik XLR male connectors to a DB-25 multipin connector with a metal shell for improved grounding and RF rejection. All 8 channels are wi red balanced as per the Tascam analog wiring standard. Thumb screws are [...]
|
|
|
|
|
|
|
|
|
|
DB25 to 4 XLR Male and 4 XLR Female. Length: 4 feet. 4 XLRF wire jackets are yellow; the 4 XLRM jackets are black, all with appropriate labeling.
Below 192 KHz, AES/EBU carries 2 channels per line, so this snake transmits 8 out and 8 in via the 8 XLR connectors. At 192kHz sample [...]
|
|
|
|
|
|
|
|
|
|
DB25 to DB25, standard wiring. Length: 25 feet with green jackets on both ends. Typically used for communication between any two standard DB25-equipped devices, for example, PRE out to 192 I/O analog in. Cannot be used for AES/EBU or TDIF digital dubbing. For TDIF dubbing, use [...]
|
|
|
|
|
|
|
|
|
|
DB25 to 4 XLR Male and 4 XLR Female. Length: 12 feet. 4 XLRF wire jackets are yellow; the 4 XLRM jackets are black, all with appropriate labeling. Below 192 KHz, AES/EBU carries 2 channels per line, so this snake transmits 8 out and 8 in via the 8 XLR connectors. At 192kHz sample [...]
|
|
|
|
|
|
|
|
|
|
DB25 to 4 XLR Male and 4 XLR Female. Length: 4 feet. 4 XLRF wire jackets are yellow; the 4 XLRM jackets are black, all with appropriate labeling.
Below 192 KHz, AES/EBU carries 2 channels per line, so this snake transmits 8 out and 8 in via the 8 XLR connectors. At 192kHz sample [...]
|
|
|
|
|
|
|
|
|
|
DB25 to 8 XLR Female; Input snake. Length: 12 feet with blue jackets on both ends and appropriate labeling. For analog or digital use.
|
|
|
|
|
|
|
|
|
|
DigiLink cables are designed to connect an HD I/O peripheral (such as 192 I/O or 96 I/O) to an HD PCI card, or an HD I/O to another HD I/O. The DigiLink 100' cable does not support sample rates above 192 kHz.
|
|
|
|
|
|
|
